Here are the building solutions that we offer. Please see below.
Our Roof Trusses and Rafters are designed by computer analysis, in seconds, and fully supported by our Design Manuals which references critical design information in both the design and application of our Roof Trusses. SFESL International can supply a variety of Roof Truss styles, from basic Plate and Cee Trusses to the high performing T Cord Truss System.
Save money with our “ready-to-go” designs complete with pre-done costings, bill of quantities, architectural, engineering, foundation designs and all documents ready to submit for approvals! One and two story designs One, two and 3 bedroom options Several Annex options Guard booths, storage sheds, garages and dog kennels
Prices shown separately for material and labor for the “superstructure” (enclosed shell of the building) and includes: Complete Steel framing for internal and external walls and roof framing and all fasteners and anchors All external cladding and roof sheeting, radiant barrier insulation, soffits and guttering
Price does not include: Foundation, internal gypsum, kitchens, bathrooms doors and windows, plumbing and electrical(and anything not specifically mentioned above)
We also give a rough estimated “Finished cost” if done through third party installers.
Interested in one of these Homes on your Land, call 61-BUILD
Material: $53, 760TTD or $7,680USD
Labour: $22,080TTD
Material: $67,200TTD OR 9,600 USD
Labour: $27,600TTD
Click here for a virtual walk through.
Material: $87,360TTD
Labour: $35,880TTD
Material: $150,000TTD or $21,429USD (Concrete work not included)
Labour: $39,375TTD
Material: $239,855 + VAT TTD or $35,276 USD
Material: $51,840 + VAT TTD or $7,624 USD
Material: $64,800 + VAT TTD or $9,530 USD
Material: $163,200TTD or $23,315USD
Labour: $64,200TTD
Material: $214,000TTD or $30,571USD (Concrete work not included)
Labour: $63,000TTD
Material: $244,800 TTD or $34,972 USD
Labour: $94,500 TTD
Material: $299,200 TTD or $42,743 USD
Labour: $115,500
Click here for a virtual walk through
.jpg)
Material: $81,000 TTD or $11,912 USD
Decking is a flooring system which comprises of C- Sections as joists connected to C section bearers. It can be designed from a range of structural C Section sizes depending on the parameters given. The strength of the system caters cantilevers and uniquely shaped decking designs. The precise engineering ensures that surfaces remain flat over time. Plycem, a concrete board (1 inch thick) deck plank goes on top.
If you’re looking to install a new outdoor deck at home, or even refresh what you already have, you may want to consider installing our PLYDECK composite decking boards instead of timber boards.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Suspendisse varius enim in eros elementum tristique. Duis cursus, mi quis viverra ornare, eros dolor interdum nulla, ut commodo diam libero vitae erat. Aenean faucibus nibh et justo cursus id rutrum lorem imperdiet. Nunc ut sem vitae risus tristique posuere.
Our PLYDECK composite decking boards are made from a combination of over 90 percent reclaimed timber, bamboo and recycled plastic. However, they’ve been carefully engineered and designed to look and feel like natural timber.
Wherever you live around Trinidad or Tobago, or even anywhere else in the Caribbean, composite decking boards are suited to all types of weather conditions. Our PLYDECK composite decking is naturally resistant to termites, rot, decay, mildew and mold. It is also ideal for laying around chlorine pools or in coastal areas near salt water. This gives composite decking a great advantage over wood! Another great benefit of composite decking boards is that they do not cup, warp or splinter. Making this material the BEST CHOICE for families with small children. Composite deck boards are also U.V. stable, which means that their colour won’t fade over time like normal timber.
Composite boards are installed and sanded in the same way as timber boards. However, they are often denser than wood, so when cutting, you may need a new, sharp, blade.One thing to note is that composite boards can slightly expand in high heat. Then when the boards cool down they will shrink back to size. So, depending on when you measure up and install your composite boards, you’ll need to consider the gaps that you leave.
The best thing about composite decking boards is that they don’t need any painting, sealing, staining, oiling or varnishing. The time saved in labour over the lifetime of the boards can be huge compared to wood.
To clean the boards, you’ll just need a bucket of warm soapy water and a high-pressured hose. To remove a more permanent stain, use a brush with stiff bristles and soapy water.
Wall panels can be used as covering for both commercial and residential buildings. It can be designed into any shape and cladded with several cladding materials such as alucobond etc.
A collection of our custom jobs.
All of these projects were completed within half the timeframe of conventional building methods.
AP Scott Group has been the supplier as multiple hardware brands such as Twyford since inception (for over 50 years).
We believe that these complementary building products can serve your building needs.
Our Roof Trusses and Rafters are designed by computer analysis, in seconds, and fully supported by our Design Manuals which references critical design information in both the design and application of our Roof Trusses. SFESL International can supply a variety of Roof Truss styles, from basic Plate and Cee Trusses to the high performing T Cord Truss Systems.
With the broadest line of fiber cement trim available and more than 20 years of proven performance, Plycem has demonstrated to customers that it has all the advantages of wood trim without any of its limitations.
All prices are subject to VAT.
1. Siding:
a. Overlapped siding cedar 30x244cm (5/8") $610TTD or 87USD
2. Ply Rock
a. 4ft x 8ft of varying thickness:
i. 8mm(3/8 inches) $217.86 TTD OR $32 USD
ii. 11mm(1/2 inch) $310 TTD OR $45 USD
iii. 12mm(1/2 inch) $375 TTD OR $53 USD
iv. Texture grooved 11mm $360 TTD OR $51 USD
v. 14mm (5/8 inch) $400 TTD OR $57 USD
vi. 17mm (3/4 inch) $510 TTD OR $73 USD
vii. 22mm (1 inch) $635 TTD OR $91 USD
3. Ply Deck
a. Planks 12 ft length *6inch width*1 inch Depth - $315 TTD OR $45 USD
4. Moulding
Plycem Fiber Cement Exterior Trim
has the strength and stability that maintains attractiveness for long-term durability and value. It's easy to cut and install on construction sites. And, it provides an affordable alternative to other exterior trim products.
Corporate Responsibility
Plycem Fiber Cement Exterior Trim is manufactured by The Plycem Company in Costa Rica. As a worldwide pioneer in the production of fiber cement materials, one of the company's priorities is the development of products that minimize the undesirable effects and optimize the positive ones on people and the environment. Plycem has attained ISO 14001, ISO 9001 and OHSAS 18001 certifications.
Environmentally Friendly
Plycem Fiber Cement Exterior Trim is made from an amalgamation of post-industrial and post-consumer recycled materials that safeguard human health and the environment. Manufacturing process utilizes principles of conservation that meet international environmental standards.
Versatility
With its reversible, smooth/textured surface, Plycem Exterior Trim complements any siding product used today. Machined square edges ensure the clean look and smooth finish of high-end construction. Plycem is ideally suited for a variety of applications, including exterior corners, windows, columns and doors, adding grace and elegance to any style architecture.
Durability
Plycem Fiber Cement Exterior Trim withstands damage from impact and is termite resistant. Temperature controlled curing and drying adheres the refined fibers and cement into tight layers that will endure years of weather exposure.
Workability
There is no need to have specialized tools at the jobsite. Plycem fiber cement is cut with the same saws and installed with the same tools traditionally used for building with wood products.
Pricing:
PLYCEM BASE MOULD.(ROD) TRIM #1 10cm 6P 8'x17MM (3/4") $360 TTD OR $51.43 USD
PLYCEM BASE MOULD.(ROD) TRIM #5 10cm 6P 8'x17MM (3/4") $375 TTD OR $53.57 USD
PLYCEM BASE MOULD.(ROD) TRIM #6 10cm 6P 8'x17MM (3/4") $350 TTD OR $50 USD
PLYCEM BASE MOULD TRIM #2 VEN V11MM/100*2438MM $350 TTD OR $50 USD
PLYCEM CHAIR RAIL (GUA) TRIM #1 17MM 6P 8'x17MM (3/4") $310 TTD OR $44.29 USD
PLYCEM CHAIR RAIL (GUA)TRIM #4 17MM 6P 8'x17MM (3/4") $240 TTD $34.29 USD
PLYCEM CHAIR RAIL (GUA) TRIM #5 17MM 6P 8'x17MM (3/4") $295 TTD $42.14 USD
PLYCEM CROWN MOULD. (COR)TRIM #5 7.5cm 6P 8'x17MM (3/4") $310 TTD OR $44.29 USD
PLYCEM CROWN MOULD. (COR)TRIM #6 7.5cm 6P 8'x17MM (3/4") $240 TTD OR $34.29 USD
PLYCEM COR MOULD TRIM#3 7.5CM 6P 8' X 14MM $210 TTD OR $30 USD
Our Hercules Fencing system is a quality polyester powder coated galvanized Rigid, medium security fencing system manufactured in Spain with certified resistance against corrosion for a warranty period of up to 10 years in normal weather conditions on materials only.
For every 8ft span the retail price is $825.00 + VAT. This includes 1 eight-foot panel (6.5 feet tall), 1 post and 4 brackets per post.
Individual pricing:
Click here for an installation video.
Twyford Sanitaryware Commercial & Gerberit Sanitaryware Residential For over 160 years Twyford has led the way in bathroom innovation, inspired by forward designs and fresh thinking the commitment to lasting quality is apparent through 25 year guarantees on all ceramic products, and lifetime guarantees against manufacturing faults on all products.
Twyford has made ground-breaking technological advances including developing the ultra-hygienic Rimfree® toilets, comfort high toilets and a range of wall hung options. Twyford is also committed to preserving and protecting the environment with a variety of water saving products. Most importantly, parts are readily available and simple to replace even without a plumber. Twyford is a holder of the royal warrant to Her majesty and will soon be transitioning to the large Geberit Group which has added significant value to the product offering.
“U” shaped channel runners (track) are used as the top and bottom tracks to secure wall studs or end support closures for floor joist framings. The “ C” studs are lined up in between the tracks, which are the components that make up the farming. Stud and Track come in a variety of gauges and are can be any custom length.
Click here for more information.
Specifications:
